#ELGATO CAPTURE CARD SET UP 1080P#

This EDID setting applies an EDID to the capture device which tells the Android device to limit the resolution to 1080p and output up at up to 120Hz instead.Ģ) Open the settings and go to the device tab.ģ) Click on the EDID Mode dropdown and select Internal.Ĥ) Below that, from the EDID (Internal) dropdown select 1080p120 for mobile.ĥ) Now click on apply. It will always prefer resolution over frame rate and output the highest resolution, even if that means reducing the frame rate down to 30fps. 6) Make sure your Elgato Game Capture HD is connected to your computer via USB, and start the Elgato.

5) Insert the Nintendo Switch into the Nintendo Switch Dock. 4) Plug the other end of this cable and plug it into an HDMI IN port of your TV/Monitor. The reason this change is required is that Android does not provide any controls for resolution or frame rate when connected to an HDMI display, or in this case HDMI capture device. 3) Plug one end of the second HDMI Cable into the HDMI OUT port of the Elgato Game Capture HD. If you have an Android device with a high refresh-rate screen such as 90Hz or 120Hz, you may notice the screen and game are locked to 60fps, or in some cases 30fps. If Elgato Game Capture HD60 detects a signal protected by HDCP, then seven red. Using analog or Bluetooth headphones may also disable audio output over HDMI. Hey everyone, Im having difficulties setting up my HD60 S capture card. HDMI 2.0 adapter is required for 4K60 or 1080p120 signalsġ) Connect the HDMI adapter to your device.Ģ) Connect an HDMI cable to the HDMI input on your capture device.ģ) To capture audio, ensure that your device's silence or mute switch is set to unmute.(Consoles) Most consoles come with High-bandwidth Digital Content Protection enabled by default. 6) After seating, screw in the Elgato Game Capture HD60 Pro to the computer's tower case to secure it into place. 5) Seat the Elgato Game Capture HD60 Pro into the PCIe slot.

#ELGATO CAPTURE CARD SET UP HOW TO#

Disable HDCP from the source you want to capture from. A guide and demonstration of how to set up and install the ElgatoGame Capture HD60 S capture card.Elgato software download page. 4) Remove the slot cover on the back of the computer's tower case that lines up with the PCIe slot. This guide will go over how to capture audio and video from an Android device such as a Galaxy Tab S7 while maintaining a high refresh rate on the device's display and in games.Īdvanced Setup Steps for high refresh-rate 120Hz devicesĬapture device with custom EDID functionalityĪdapter to convert the port on the Android device to HDMI A computer -a USB 3.0 port -an Elgato HD60 S capture card -a source to capture from -two HDMI cables The HD60 S comes with one HDMI cable and a 3.0 USB cable.

Elgato capture card set up